Synthetic Acid Ultra Low pH Concrete Stripper and Cleaner
Foro SapH Etch is a non-corrosive and biodegradable concrete stripper. Powered by SynTech®, Foro SapH Etch has earned a triple zero HMIS score. Our formulation is made to replace 32% hydrochloric acid (muriatic) and to eliminate the dangerous health, storage and environmental hazards associated with it. Foro SapH is non-fuming, so it can be safely used in any enclosed home or work space.
Infused with SynTech®, the world’s only synthetic acid, Foro SapH Etch has a hydrogen load high enough to dissolve calcium carbonate. Our formulation is made to replace 32% hydrochloric acid (muriatic) and to eliminate the dangerous health, storage and environmental hazards associated with it. Foro SapH is non-fuming, so it can be safely used in any enclosed home or work space. But because SynTech® has a much stronger bond to the H+ ion than muriatic acid, Foro SapH Etch has a slower spending nature. This makes
it ideal for use in detailed and architectural etching, as well as for more routine concrete cleaning and preparation applications. Foro SapH Etch is ultra low pH and non-corrosive. And because it is 100% synthetic, no neutralizing step is needed afterward. Simply rinse with water. It is the easiest etching product you will ever use.
Odor: mild soapy odor
Cold stability: -26° F Detergency: moderate
Wetting ability: excellent
Boiling point: 214° F
Solubility in water: 100%
Volatile by volume: N/A
Shelf life: 1 year
Non-DOT Regulated/Non-DOT Hazardous Exempt as per 49 CFR 173.154(d)(2) <6.25 mmpy
When tested, Foro SapH Etch showed no potential for the generation of carbon dioxide under NIOSH 7903 OSHA & ACGIH testing protocols governing workplace environments.
Keep container closed when not in use. Rinse empty container with water and discard normally. To prevent minor irritation, we recommend using safety glasses, gloves and protective equipment. Avoid contact with aluminum.
Toxicity Limits: Test Procedure OECD 202, 48 hr.LC 50
and LD 50 (rat oral).
Conclusion: NON-TOXIC Mutagenicity Limits: OECD Guidelines Sec. 471
A modified Draize method was used as described in OECD Guidelines for the testing of Chemicals Sec. 404 and complies with the requirements of OECD Principles of GLP, Annex (rev July 1992).
Conclusion: Foro SapH Etch is classified as a “VERY MILD SKIN IRRITANT.”
Test Procedure: Hach Reactor Digestion method for waste water and sea water. Hach Reactor Digestion Method is a semi-micro adaptation of the Standard Methods Conclusion: 100% BIODEGRADABLE
DOT, IMO, IATA , IMDG – Non-Regulated TDG – Non-Regulated to and through Canada SARA 313 311/312 – This product does not contain any ingredients that are subject to the reporting requirements. California Prop 65 – This product does not contain any ingredients known to the state of California to cause cancer, birth defects or any other reproductive harm. FDA – Approved as Safe (GRAS) OSHA – Non-Hazardous USDA Authorization – A1, A2, A4, A8, C3